SPARKYLINUX ADVANCED INSTALLER TUTORIAL INSTALL
SPARKYLINUX ADVANCED INSTALLER TUTORIAL ISO
SPARKYLINUX ADVANCED INSTALLER TUTORIAL DOWNLOAD

Then, enter the network default gateway IP address and select. Select to enter the network netmask and select. Select “Configure Network Manually” and press the key to set the system's static IP address.If you don’t want to set a static IP address, proceed to Step 6. To change the IP address on a running 3CX system, you need to reboot the machine and then re-provision the connected apps and IP phones. The system’s IP address affects the running PBX services, connected clients and IP phones. Select or press the ‘ ESC ’ key when asked for the hostname to first set the IP address of the system and then configure the hostname. Important : Y ou need to configure a static IP address for the 3CX host machine.

SPARKYLINUX ADVANCED INSTALLER TUTORIAL INSTALL

Boot your system with the downloaded 3CX ISO, select “ Install ” from the main boot screen and press the key.

If you are install ing on a mini PC, then create a bootable image, plug it into one of the available Mini PC’s USB ports, set the BIOS to boot from the USB drive to start the installation.

SPARKYLINUX ADVANCED INSTALLER TUTORIAL ISO

If you are using a hypervisor/virtualized OS, set the CD option to boot from the ISO and ensure the CD drive is set to connect on startup.

SPARKYLINUX ADVANCED INSTALLER TUTORIAL DOWNLOAD

We can not assist with any issues in installing Debian 10 on barebone hardware. If you want to do a barebone install ensure that the hardware works with Debian 10 and that the hardware vendor will support you with any issues. not used by any other service.ģCX can be installed on any hardware that runs Debian 10.

See also Ports Used by 3CX Phone System for the required ports that need to be available, i.e.

Do not configure the 3CX host machine with a virtual network, VPN interface or the TeamViewer VPN option.

See the Firewall & Router Configuration Guide.

Installing 3CX on a machine behind a NAT device requires port forwarding.

The PBX needs to be configured with a dedicated public IP.

LAN installs are supported on properly configured RFC 1918 private networks, i.e.

Microsoft Hyper-V Server (6.2) and above capable of running Debian 10 - see our Hyper-V Page for required settings.Īvoid using 3CX on converted VMs (P2V) due to possible timing issues, causing the guest OS not to sync with the hypervisor’s timer.

5u1 and above, with VMWare Tools package installed. ģCX is t ested and supported to run as a Virtual Machine on these hypervisor platforms:

Call recording use - stresses the system for audio mixing and file storage.

Number of active users - 100 Web Client active sessions is more demanding than 100 occasional calls via IP phones.

Number of simultaneous calls the system handles.

Review the suggested hardware specifications to allocate additional CPU time and RAM resources b ased on: Υour machine or VM needs at least one (1) CPU core and one (1) GB of RAM.

Any changes to the system will render your installation unsupported!.

Do not install system updates via the command line! This is done by the 3CX system via updates after they have been tested!.

Do not install other packages or change the configuration.

To be able to request support, you must dedicate your Debian Linux instance to 3CX. The OS management can be done from within the 3CX Management Console. You can download it from your customer portal account.

Self-managed (Private cloud - On-premise)ģCX created a Debian Linux ISO to make installation faster and management easier.

Sparkylinux advanced installer tutorial